PENNZOIL® LONG-LIFE® MOTOR OIL

A Premium Motor Oil For Heavy-Duty Diesel and Gasoline Engines

PRODUCT DESCRIPTION

PENNZOIL LONG-LIFE MOTOR OIL provides premium quality service in both diesel and gasoline engines. It is specially formulated for heavy-duty service in diesel engines in both on- and off-highway vehicles and equipment.

PENNZOIL LONG-LIFE MOTOR OIL is available in single SAE viscosity grades 10W, 20W-20, 30, 40, and 50, and as multi-grade SAE 15W-40. The 15W-40, SAE 30 and 40 exceed the performance requirements for Mack EO-K/2 and Detroit Diesel 6V92-TA. The SAE 15W-40 is approved by Mack under the EO-L specification. PENNZOIL LONG-LIFE SAE 15W-40 exceeds the requirements of the Caterpillar 1N engine test, and meets the requirements of API Service Classes CG-4, CF-4, CF-2, CF/SH. The SAE 30 meets the requirements of API Service Classes CF-2, CF/SH. The SAE 40 and SAE 50 meet the requirements of API Service CF-2, CF/SH. All other grades meet the requirements of API Service CF and SH.

Newly designed low emission diesel engines actually tend to produce more soot, however, this soot is captured in the engine oil and does not go out the exhaust. PENNZOIL LONG-LIFE MOTOR OIL contains the latest development in dispersant technology to resist oil thickening caused by this soot. The dispersants minimize sludge formation and effectively keep particles in suspension to extend filter life.

PENNZOIL LONG-LIFE MOTOR OIL's high-temperature detergents help control formation of combustion chamber deposits, piston deposits, and varnish that could lead to ring sticking and breakage. It neutralizes acids commonly found in diesel engines, keeping corrosive wear to a minimum. PENNZOIL LONG-LIFE MOTOR OIL provides protection from rust and corrosion, and reduces low-temperature deposits that are common problems in gasoline engines. By providing excellent protection for engine components, it helps extend engine life.

PENNZOIL LONG-LIFE SAE 15W-40 Motor Oil is formulated with the revolutionary Pennzstar™ molecule. This means that LONG-LIFE SAE 15W-40 will maintain its viscosity under conditions of high temperature and high stress, protecting moving parts from friction, wear and engine destroying metal-to-metal contact

PENNZOIL LONG-LIFE SAE 15W-40 has outstanding resistance to "shearing out" of viscosity grade, so it can continue to provide the oil film and wear protection necessary, even under extended drain interval conditions.

APPLICATION

PENNZOIL LONG-LIFE MOTOR OIL is truly a universal oil. It is recommended for use in over-the-road diesel trucks, heavy-duty construction equipment, mining equipment, oil field engines, farm vehicles and passenger cars. Because it is also recommended for gasoline engines, PENNZOIL LONG-LIFE MOTOR OIL provides mixed-fleet operators the convenience of a single line of motor oils for all vehicles.

PENNZOIL LONG-LIFE MOTOR OIL can be used with complete confidence for extended oil drain intervals when combined with used oil monitoring (Pennz-Test®) maintenance practices. Always change oil as specified by the engine manufacturer to maintain your warranty.

PENNZOIL LONG-LIFE MOTOR OIL meets or exceeds the performance requirements of Caterpillar, Cummins, Navistar, American Motors, Chrysler, Ford, General Motors, Detroit Diesel (low ash 1% max.) and Mack EO-L.

PENNZOIL LONG-LIFE MOTOR OIL meets the performance requirements of military Commercial Item Descriptions (C.I.D.) A-A-52039A and A-A-52306. PENNZOIL LONG-LIFE MOTOR OIL also meets the transmission fluid requirements of Caterpillar TO-2 and Allison C-4 specifications. PENNZOIL LONG-LIFE MOTOR OIL is recommended wherever engine manufacturers specify the use of an engine oil meeting API Service Classification CG-4, CF-4, CF-2, CF and SH, or any combination such as CF/SH, CF-4/SH or CG-4/SH. Always refer to the vehicle owner's manual for the correct viscosity choice.

BENEFITS

MS-6395C, and MS-6854

TYPICAL PHYSICAL AND CHEMICAL PROPERTIES

PENNZOIL® LONG-LIFE® MOTOR OIL

TESTMETHOD TYPICAL RESULTS

SAE Viscosity GradeSAE J300(MAR93) 10W20W-2030
API Service Category CF/SHCF/SHCF-2, CF/SH
Gravity
Specific @ 60°F(15.6°C)ASTM D-287 0.8760.8810.887
API30.0 29.128.0
Density, Pounds per Gallon 7.37.37.4
Flash Point, °C(°F) Min.ASTM D-92 210(410)224(435)237(460)
Pour Point, °C(°F) Max.ASTM D-97 -33(-27)-24(-12)-21(-5)
ColorASTM D-15008.0 8.08.0
Viscosity
@ 40°C, cStASTM D-445 4165101
@ 100°C, cStASTM D-445 6.58.511.5
@ 100 °F, SUSASTM D-2161 & 445 191301468
@ 210°F, SUSASTM D-2161 & 445 47.554.064.6
Viscosity IndexASTM D-2270 109101100
High Temp/High Shear Vis., cPASTM D-4683 2.32.83.5
Low Temperature Viscosity
Vis (cP) at Temp (°C), Max.ASTM D-2602 3500 @-204500 @-10 --
Borderline Pumping
Temperature, °C Max.ASTM D-3829 -25-15--
Sulfated Ash Content,
Wt % ASTM D-874<1.0 <1.0<1.0
Shear Stability,
% Vis Loss, DIN Method ------
Total Base NumberASTM D-2896 8.08.08.0
Product Code032510 032520032530

TYPICAL PHYSICAL AND CHEMICAL PROPERTIES

PENNZOIL® LONG-LIFE® MOTOR OIL

TESTMETHOD TYPICAL RESULTS

SAE Viscosity GradeSAE J300(MAR 93) 405015W-40
API Service Category CF-2, CF/SHCF-2, CF/SHCG-4, CF-4, CF-2, CF/SH
Gravity
Specific @ 60°F(15.6°C)ASTM D-287 0.8960.8960.882
API26.4 26.428.9
Density, Pounds per Gallon 7.467.467.36
Flash Point, °C(°F) Min.ASTM D-92 252(485)267(512)224(435)
Pour Point, °C(°F) Max.ASTM D-97 -15(5)-12(10)-27(-15)
ColorASTM D-15008.0 8.06.5
Viscosity
@ 40°C, cStASTM D-445 164252110
@ 100°C, cStASTM D-445 15.520.015.0
@ 100 °F, SUSASTM D-2161 & 445 7601167510
@ 210°F, SUSASTM D-2161 & 445 80.098.578.0
Viscosity IndexASTM D-2270 9696142
High Temp/High Shear Vis., cPASTM D-4683 4.55.54.1
Low Temperature Viscosity
Vis (cP) at Temp (°C), Max.ASTM D-2602 ----3500 @-15
Borderline Pumping
Temperature, °C Max.ASTM D-3829 -----20
Sulfated Ash Content,
Wt % ASTM D-874<1.0 <1.0<1.0
Shear Stability,
% Vis Loss, DIN Method ----<4.0
Total Base NumberASTM D-2896 8.08.08.0
Product Code032540 032550032525